BPS-1000 – Biomass Processing System

The BPS-100 is an automated biomass processing system that dehydrates, pasteurizes, and pulverizes biomass resulting in value-added products.  Product applications include (but not limited to) woody biomass, animal manure & bedding, agricultural byproduct, and more.  The Bio-Burner is integrated into the system providing heat for the sterilization and dehydration process.

Technical Specifications


Hammer Mill Power
Hammer Mill Size
Hammer Mill Screen Options
Hammer Mill Screens Included
Hammer Mill Safety
Dryer Tube Quantity
Dryer Tube Length
Total Dryer Tube Length
Dryer Tube Diamater
Dryer Tube Auger Motor (x5)
Feed Automation
Production Capacity
Maximum Product Input Size
Maximum Moisture Content
Discharge Auger Size
Product Level Sensor
Internal Hot Water Storage
Water Pump
Heat Source Requirement
Hot Air Temperature Range
Hot Water Temperature Range
Dwell Time
Heat Dump System
Power Requirements
Input Airlock HP
Output Airlock HP
Cyclone Size
Blower Size


Hammer Mill Power : 20 HP - Belt Driven
Hammer Mill Size : 22 inch
Hammer Mill Screen Options : 1/4", 3/8", 3/4", 1 1/4", 2"
Hammer Mill Screens Included : 1 included
Hammer Mill Safety : 2 Safety Interlocks
Dryer Tube Quantity : 5
Dryer Tube Length : 23 Feet per tube
Total Dryer Tube Length : 155 Linier Feet
Dryer Tube Diamater : 14 inch
Dryer Tube Auger Motor (x5) : 3/4 HP
Feed Automation : Yes
Production Capacity : Up to 10 cubic yards per hour
Maximum Product Input Size : Hog fuel up to 6 inch chips
Maximum Moisture Content : Based on the raw materials ability to "flow" through the input auger tube.
Discharge Auger Size : (2) 8 Inch (dryer & hammer mill discharge augers)
Product Level Sensor : (2) product input & output level sensing capabilities
Internal Hot Water Storage : 570 Gallons
Water Pump : 1/3 HP / 50 GPM
Heat Source Requirement : BB-500 or BB-1000
Hot Air Temperature Range : Up to 1000°F flash drying temperature
Hot Water Temperature Range : 135°F - 205°F
Dwell Time : Variable
Heat Dump System : 200K BTU Standard - up to 1.4MM BTU Optional
Transportation : Integrated lift hooks and forklift pockets
Assembly : Simplified modular assembly
Footprint : Approximatly 60'x16'
Power Requirements : 60 Amp / 480 3-Phase
Input Airlock HP : 1 HP
Output Airlock HP : 1/2 HP
Cyclone Size : 10 inch
Blower Size: 5 HP